Buy, Order, Customize Dry type Electrical Transformers made in Canada online.
Tuesday, September 29, 2020
Log In

Log In

Forgot Your Password?

Cart Subtotal: US$ 0.00

Line Reactor 90C1600E6/E1

Be the first to review this product

Availability: Available for order. Production Time: 6 weeks

US$ 5,014.00

Quick Overview

Catalog No.: 90C1600E6/E1
Line Reactor • Three Phase
Conductor: Copper
US$ 5,014.00


Three phase Line Reactor 90C1600E6/E1 has primary and secondary windings that are physically separated from each other. It allows AC power to be taken from one device and fed into another without electrically connecting the two circuits. The transformer blocks transmission of DC currents from one circuit to the other, but allow AC signals to pass, and also blocks interference caused by ground loops. Secondary neutral to ground bonding eliminates common mode noise, providing an isolated neutral-ground reference for sensitive equipment.


Line Reactor 90C1600E6/E1 Winding Schematic:

Delta-Delta(Dd0) Three phase connection

Preliminary General Drawing. (Dimension, inch).


Line Reactor general dimensions

*All information and images presented here is based on preliminary data or design and may be changed without prior notice.
Request Drawing Proof to confirm dimensions from Optional Feature tab, if it is critical.

Full Specification

Catalog No. 90C1600E6/E1
Product Type Line Reactor
Phase Three
Maximum Current N/A
Voltage range N/A
Reactor Power Rate N/A
Frequency, Hz 60
Inductance, mH N/A
Impedance 3%
Current over load capability 150% for 1 min
Saturation Level 250% of rated current (50% rated inductance minimum at 350% rated current).
Vector Group Delta-Delta(Dd0)
Winding Conductor Copper
Temperature Rise, °C 150
Insulation Class 220 (R)
Insulation Level, (B.I.L), kVA 10
Sound Level, dB 60
Standards, Certifications, Compliances: Seismic Qualified SDS=1.60g 2/h=1.0 OSHPD OSP-0109-10.
UL Listed., cUL Listed.
Enclosure Type Nema 3R. Outdoor Non-Ventilated Weather resistant steel enclosure
Weight, Lbs 670.0
Country of Manufacture Mexico

Transformer Calculator

Help: To calculate required kVA of the transformer enter Load Amps, Load Volt and press "Required kVA" button. Also you can calculate Current from other two parameters.
Note: Recommended add up to 20% to the calculated kVA