United StatesDetails
Three phase Epoxy Encapsulated Transformer BC6J1-S1/EP is an isolation transformer with primary and secondary windings that are physically separated from each other. It allows AC power to be taken from one device and fed into another without electrically connecting the two circuits. The transformer blocks transmission of DC currents but allow AC signals to pass. It is sealed in silica sand and resin solid mass, completely enclosing and protecting the core and coil, while significantly reducing audible noise and suitable for hazardous environments.
Preliminary General Drawing. (Dimension, inch).
*All information and images presented here is based on preliminary data or design and may be changed without prior notice.
Request Drawing Proof to confirm dimensions from Optional Feature tab, if it is critical.
Epoxy Encapsulated Transformer BC6J1-S1/EP Winding Schematics:
Full Specification
| Catalog No. | BC6J1-S1/EP |
|---|---|
| Product Type | Epoxy Encapsulated Transformer |
| Phase | Three |
| Power Rating | 6 kVA |
| Frequency, Hz | 60 |
| Vector Group | Delta-Wye(DYn) |
| Primary voltage | 575 Volt |
| Primary Max Current, Amps | 6.0A |
| Primary Terminals | H1-H2-H3 |
| Primary Terminal Lugs | 2-14 AWG |
| Primary Voltage Taps | 0%; ±5.0% |
| Secondary Voltage | 230Y/133 Volt |
| Secondary Max Current, Amps | 15.1A |
| Secondary Terminals | X0-X1-X2-X3 |
| Secondary Terminal Lugs | 2-14 AWG |
| Winding Conductor | Copper |
| Temperature Rise, °C | 130 |
| Insulation Class | 200 (N) |
| Insulation Level, (B.I.L), kVA | 10 |
| Efficiency at 35% Load, % | 94.72 |
| ANSI/IEEE Impedance, % | 3.0-4.0 |
| Sound Level, dB | 40 |
| Standards, Certifications, Compliances: | CSA Standard C22.2. No.47 Air Cooled Transformers (Dry Type)., CSA certified. File No. LR34493 Seismic Qualified SDS=1.60g 2/h=1.0 OSHPD OSP-0109-10 for USA zone 4 and Canada zone 6. UL Listed. File No.E108255., Meets NEMA ST-20, ISO9001 Quality Certification. |
| Enclosure Type | Nema 3R. Outdoor Non-Ventilated Weather resistant steel enclosure (IP54) |
| Weight, Lbs | 180.0 |
| Country of Manufacture | Canada |
